Copper alloys Phau ntawv electrode ECuNi Vuam accessories
Daim ntawv thov
Feem ntau siv rau vuam 70-30 tooj liab-nickel alloy los yog 70-30 tooj liab-nickel alloy / 645-Ⅲ steel puas hlau thiab 70-30 tooj liab-nickel alloy li cladding, feem ntau siv nyob rau hauv dej hiav txwv engineering lug, xws li desalination ntaus ntawv, seawater kev kho mob, evaporator, condenser, thiab lwm yam.
Kuj tseem siv rau 645-Ⅲ steel ua lub hauv paus txheej txheem ntawm cov hlau sib xyaw; Nws kuj tseem siv tau rau hauv 90/10 tooj liab-nickel alloys.
CHEMICAL COMPNET:
| ALLOY (wt%) | C | Mn | Si | Ni | Fe | Ti | Cu | P | S | |
| GB/T RULES | - | 2.50 Nws | 0.50 ib | 29.0-33.0 Nws | 2.50 Nws | 0.50 ib | Margin | 0.02 ib | 0.015 ib | |
| AWS RULES | - | 1.0-2.5 hli | 0.50 ib | 29.0-33.0 Nws | 0.40-0.75 Nws | 0.50 ib | Margin | 0.02 ib | 0.015 ib | |
| EXAMPLE VALUE | 0.01 ib | 1.45 Nws | 0.3 | 30.4 ib | 0.65 ib | 0.1 | 67 | 0.090 ib | 0.004 ib | |
MECHANICAL PROPERTY:
| QHOV TSEEB | YIELD zog (MPa) | EXTENSION zog (MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
| GB/T RULES | - | 350 | - | 20 | ||||
| AWS RULES | - | 350 | - | 20 | ||||
| EXAMPLE VALUE | 316 | 4 35 | - | 36.5 ib | ||||
WELDING PARAMETERS pom zoo:
| DIAMETERS SPECIFICATIONS (mm) | 2.6 * 300 | 3.2 * 350 | 4.0 * 350 | ||||||||
| ELECTRICITY (Amp) | H/W | 80-120 : kuv | 100-150 | 140-180 : kuv | |||||||
| O/W | 70-110 : kuv | 90-135 : kuv | - | ||||||||
Peculiarity
Cov electrode yog Cu70-Ni30 alloy raws li cov tub ntxhais vuam, txheej rau qis hydrogen series ntawm tooj liab-nickel electrode.
Cov ntsiab lus tsawg ntawm cov khoom seem (S, P, Pb, Sn thiab Zn, thiab lwm yam), zoo cracking kuj
Cov ntsiab lus ntawm Mn thiab Ti yog nce kom tsim nyog, thiab cov thermal tawg thiab qhov pores raug txwv.
Qhia kom meej
Zoo tawg kuj
Kev txwv tsis pub thermal tawg thiab pores
Hais txog peb
Factory fioor zaub
Cov ntaub ntawv thov
Inner Mongolia Xinao Energy Co., Ltd. 3 * 3000m³ tsis tshua muaj kub kheej kheej tank
Shandong Zibo Haiyi 8 teeb 3000m³ propylene kheej kheej tank
Lub Hoobkas tua
CHEMICAL COMPNET:
| ALLOY (wt%) | C | Mn | Si | Ni | Fe | Ti | Cu | P | S | |
| GB/T RULES | - | 2.50 Nws | 0.50 ib | 29.0-33.0 Nws | 2.50 Nws | 0.50 ib | Margin | 0.02 ib | 0.015 ib | |
| AWS RULES | - | 1.0-2.5 hli | 0.50 ib | 29.0-33.0 Nws | 0.40-0.75 Nws | 0.50 ib | Margin | 0.02 ib | 0.015 ib | |
| EXAMPLE VALUE | 0.01 ib | 1.45 Nws | 0.3 | 30.4 ib | 0.65 ib | 0.1 | 67 | 0.090 ib | 0.004 ib | |
MECHANICAL PROPERTY:
| QHOV TSEEB | YIELD zog (MPa) | EXTENSION zog (MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
| GB/T RULES | - | 350 | - | 20 | ||||
| AWS RULES | - | 350 | - | 20 | ||||
| EXAMPLE VALUE | 316 | 4 35 | - | 36.5 ib | ||||
WELDING PARAMETERS pom zoo:
| DIAMETERS SPECIFICATIONS (mm) | 2.6 * 300 | 3.2 * 350 | 4.0 * 350 | ||||||||
| ELECTRICITY (Amp) | H/W | 80-120 : kuv | 100-150 | 140-180 : kuv | |||||||
| O/W | 70-110 : kuv | 90-135 : kuv | - | ||||||||
